ilidahealthcare.blogg.se - Vs express 2015 for mac os

#Vs express 2015 for mac os drivers#
#Vs express 2015 for mac os Patch#
#Vs express 2015 for mac os code#
#Vs express 2015 for mac os download#
#Vs express 2015 for mac os windows#

If your SMBIOS choice has a built-in injector for it, and there are issues with devices on an internal hub due to the port injector, you will need to create your own hub port injector that overrides the default. There is no easy way to disable the built-in port injectors for a hub. There is also a much simpler way to implement USB2 routing in FakePCIID.kext and FakePCIID_XHCIMux.kext (discussed later).

#Vs express 2015 for mac os Patch#

That patch should be avoided in 10.11, as it renames XHC to XHC1 which introduces the possibility of matching against built-in port injectors. A common fix for prior OS X versions was to apply the "USB3 Multiplex" patch.

You should also verify that XHCI is named XHC and not XHC1. Disregard for now, it will be discussed later. Note: You also see "Item 0" here which is part of emulating Windows. Using ist to implement these patches is the easiest and most direct way. You can copy/paste the patches to your own DSDT from the config_ist provided at the USBInjectAll project (link provided above). Looking at it in Xcode, it appears as follows: A global search and replace is also a reasonable strategy.įor the Gigabyte BRIX, I didn't need to patch DSDT so I used Clover ist-based patches in ist/ACPI/DSDT/Patches: Note: It is quite possible that the patches above may not catch all instances of EHC1/EHC2 in your DSDT, so you may have to change some references manually. Into_all all code_regex \.EHC2, replaceall_matched begin. Into device label EHC2 set_label begin EH02 end Into_all all code_regex \.EHC1, replaceall_matched begin. Into device label EHC1 set_label begin EH01 end Renaming can be accomplished with find/replace in your patched DSDT, or via Clover ist/ACPI/DSDT/Patches.įor example, on my Lenovo u430, I used the following patches to rename EHCx->EH0x: By renaming EHC1 to EH01 and EHC2 to EH02, you can effectively disable the built-in port injectors that match the SMBIOS you're using. For most PCs, the XHCI controller (USB3) is named 'XHC', so it will not match on the built-in injectors which use 'XHC1'.ĮHC1 and EHC2 are typically used by both Macs and PCs to identify the two EHCI controllers (USB2). The first class of port injectors are easy to disable with a DSDT patch.

Hub port injectors: These match on Mac model and locationID (which is based on the address of the controller and port).

Controller injectors: These match on Mac model (SMBIOS) and controller name in ACPI (EHC1/EHC2/XHC1).

Some DSDTs are very accurate and respond appropriately to the options selected (BRIX, for example), some not so much.įirst step is to insure that the default injectors are not in effect.

#Vs express 2015 for mac os code#

These settings often affect code within the DSDT that deals with XHCI controller initialization, USB2 routing, and USB3 port enabling. For most PCs, you should use XHCI "auto" or "smart auto". It is covered in my companion guide:Ĭonfiguration of the USB controllers is often dependent on BIOS settings. Unless your ACPI implementation is perfect, you should plan on creating a custom SSDT for USBInjectAll.kext. Note: It would be a good idea to read the USBInjectAll README, but probably not until reading this thread so you can understand the problems more clearly. The built USBInjectAll.kext is available from the link provided in the README.

#Vs express 2015 for mac os download#

If you need various files in the repo, download the ZIP. USBInjectAll.kext and a few other goodies are available here.

#Vs express 2015 for mac os windows#

patching DSDT to simulate a version of Windows when running OS X.

injecting ports with a custom port injector or custom SSDT for USBInjectAll.kext.

using FakePCIID_XHCIMux to route USB2 devices on XHC to EHCI.

There are a few methods/kexts/techniques for dealing with it all. not Intel, not Fresco Logic), you can try the latest GenericUSBXHCI.kext: Update: For unsupported USB3 controllers (eg. Please do not ask about it in this thread. Third party USB3 such as Asmedia, NEC/Renasas are problematic. To work around these problems, there are potentially several steps that need to be taken. The port injectors that are built-in can also interfere with USB on a hack as it is unlikely the USB topology for a given Mac model is the same as your PC.

In the event properties are injected to define the available ports, these properties are used instead of ACPI. In fact, even Apple's own products were found to be incorrect, so Apple created a way to override DSDT with a port injector. If it is not correct, ports that exist may not be enabled by the new drivers. This puts more pressure on ACPI (DSDT) to be correct.

#Vs express 2015 for mac os drivers#

The new drivers appear to employ the use of ACPI to a much greater extent than the previous drivers. In 10.11, Apple has completely rewritten the USB drivers. Building a CustoMac Hackintosh: Buyer's Guide